Gladiator TR Fencing
Gladiator TR is a custom built fencing system designed to provide a very high level of strength and security while avoiding the industrial look associated with some fencing products.
Your finished Gladiator TR fence installation will provide excellent security, will look good and enhance the value and appearance of your property.
The heart of the system is the manner in which the 25mm x 25mm pickets pass through 50mm x 50mm x 5mm angle rails. The pickets are welded to the rails at each intersection and cannot be levered off.
The angle rails are HotDip Galvanised after piercing and prior to assembly into the fence to maximise protection against corrosion. All other material used is galvanised and the product is finally Powder Coated in your choice of colour for appearance and long life.
Gladiator TR is fully custom built and can be manufactured to comply with any specification requirement. Fence height is your choice and appropriate gate designs and gate post designs are available to suit any fence height.
Sliding Gates and other special purpose gates with full accessories can be specified.
Intermediate posts will normally be 65mm x 65mm with 75mm x 75mm corners and ends, however any size can be specified to meet particular requirements.
The "CAITOR TOP" security strip is an option for all gates and provides an effective and unobtrusive security barrier that enhances the appearance of the gate.
If you are looking for a fence with excellent strength and security combined with good appearance then Gladiator TR may be the answer.
All of our fencing is manufactured at our modern factory in Embleton, Western Australia where our high standards ensure a quality product.